OOO “PK “Tehnoizol Baltika” produces plastic parts for roofs and is a leading Russian producer in this segment. Production is equipped with up-to-date Czech equipment: production process is fully automatized from material feed to packaging of finished goods. The factory has laboratory, that checks physical-mechanical properties of produced goods and issues quality passport for each production run.
Roofing materials Polivent are made of shock- and frostproof (from -50C to +90C) polypropylene, resistant to ultraviolet radiation. Aerators and roof drains Polivent consist of several parts, what makes them easy to transport and store.
OOO "PK "Tehnoizol Baltika" produces plastic parts for roofs and is a leading Russian producer in this segment. Production is equipped with up-to-date Czech equipment: production process is fully automatized from material feed to packaging of finished goods. The factory has laboratory, that checks physical-mechanical properties of produced goods and issues quality passport for each production run.
Roofing materials Polivent are made of shock- and frostproof (from -50C to +90C) polypropylene, resistant to ultraviolet radiation. Aerators and roof drains Polivent consist of several parts, what makes them easy to transport and store.
Aerator
Consists of four parts. Unique design of cover enables additional air draft in the tube. Can be utilized in every climatic zone. One such aerator covers 80-100 square meters of the roof.
Aerator
Consists of three parts. Special fit ring to roof coat assures thorough isolation around tube. One such aerator covers 50-60 square meters of the roof.
Aerator
Consists of three parts. Special fit ring to roof coat assures thorough isolation around tube. One such aerator covers 50-60 square meters of the roof. Can be utilized in every climatic zone.
Aerator
Consists of three parts. Unique design of cover enables additional air draft in the tube.
One such aerator covers 80-100 square meters of the roof.
Aerator
Consists of 4 parts (two skirt-bases fit ring and cover). Special fit ring to roof coat assures thorough isolation around tube. To be used when ventilation is needed both under vapor sealing and above lagging, especially when lagging is a vapor barrier (for example, XPS). One such aerator covers 50-60 square meters of the roof.
Aerator
Consists of 4 parts (two skirt-bases, fit ring and cover). Special fit ring to roof coat assures thorough isolation around tube. To be used when ventilation is needed both under vapor sealing and above lagging, especially when lagging is a vapor barrier (for example, XPS). One such aerator covers 50-60 square meters of the roof.
Roof drain
High-quality roof drain made of polypropylene, equipped with leaf filter. This drain is intended to be used for removal of rain water from flat roofs. It is not subject to corrosion, has good mechanical properties and could be used in all Russian climatic zones.
It is recommended to mount one such drain per 300-400 square meters of roof.
Soaker size 380*380 mm
Remedial roof drain
Remedial roof drains are made of polyethylene, what enables them to fit tightly any surface. To be utilized in case of water course system reparation. Drain’s prong to be injected in old roof drain or in sewer pipe (pipe diameter 100 – 110 mm). Roof drain is equipped with leaf filter.
Soaker size 297*297 mm
Leaf filter
To be mounted in old drains (including cast-iron) of diameter from 60 to 200 mm in order to avoid ingress of leafs and other trash. Thanks to utilization of leaf filter, water course system won’t need constant servicing.
Roofing point aerators are used for pitched roof for ventilation of under-roof space. To be installed 0,5-0,8 meters from apex, with prior enabling of air intake from cornices. Pressure fall (due to difference in heights) causes moisture (evaporating from heat insulation material) come out of roofing with the use of air motion - heat insulation material remains dry, saving it’s isolating properties.
Ventilation and sewers outfalls Polivent
Aerator
Point aerator for bituminous tile. To be installed 0,5-0,8 meters from apex, with prior enabling of air intake from cornices. Pressure fall (due to difference in heights) causes moisture (evaporating from heat insulation material) come out of roofing with the use of air motion - heat insulation material remains dry, saving it’s isolating properties. For the purposes of defense from insects and rainfalls it is recommended to cover hole in OSB with super-diffusive membrane. One aerator covers 20 square meters of the roof.
Aerator
Premium-class point aerator for bituminous tile. To be installed 0,5-0,8 meters from apex, with prior enabling of air intake from cornices. Pressure fall (due to difference in heights) causes moisture (evaporating from heat insulation material) come out of roofing with the use of air motion - heat insulation material remains dry, saving it’s isolating properties. It is recommended to mount one such aerator per 50 square meters of the roof.
There are three modifications:
Aerator for bitum tile roofing
Aerator for bitum tile roofing
Aerator for metal tile Monterrey roofing
12 screws included
Aerator for seam roof and finished bitum tile roofing
12 screws included
Adapter is used for connection of Polivent KTV-ventil with air conduit.
to be connected with air conduit of diameter 110, 120 and 125
To be used on pitched roofs for ventilation and sewers outfall. May be used as point aerators for ventilation of under-roof space.
There are two types of outfalls in our assortment
4 screws included
Can be equipped with cover
with insulation preventing from condensation
equipped with cover
To be used on pitched roofs for sealing of ventilation and sewers exit on the roof. Through-pass elements are the base for mounting of ventilation and sewers exit.
There are 3 modifications in our assortment:
Through-pass element Polivent for bitum tile
Base 530*465
Passageway 250*160
Through-pass element Polivent for metal tile Monterrey
Through-pass element Polivent for seam roof and finished bitum tile roofing
OOO “PK “Tehnoizol Baltika” produces plastic parts for roofs and is a leading Russian producer in this segment. Production is equipped with up-to-date Czech equipment: production process is fully automatized from material feed to packaging of finished goods. The factory has laboratory, that checks physical-mechanical properties of produced goods and issues quality passport for each production run.
Quality of our production is confirmed by several certificates:
Xenotest of aerators "Polivent-KTV-Ventil"
